(0)
£0.00
Temptu SP35 GRAVITY FED AIRBRUSH
Hover over image to zoom.
Click to enlarge

Temptu SP35 GRAVITY FED AIRBRUSH

Dual action, .35mm nozzle 

  code:ABREQ-SP35 GRAVITY FED AIRBRUSH
£75.00
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

An airgun with a dual action trigger: it controls two actions, both the air flow and the fluid/product in a double stepped action. The first step is to gently press down the trigger (this releases the air flow), the second step is to pull the trigger back towards you- this controls the product flow.

Gravity fed design has a top cup/bowl in which to dispense the makeup.  

0.35mm nozzle.

Technical Advice:

It is important to press down for air first before pulling back and introducing the product through the gun.

An advantage of a dual action style gun is the ability to create a steady airflow before allowing the product through the nozzle, thus eliminating an initial splatter. 

As a general rule of thumb, with a good quality airbrush (such as Temptu) any product that is fluid enough to paint should be fine to airbrush, as long as it is a liquid consistency, it can be thinned down to dilute and make it even more fluid if required. Ensure that you use the correct, corresponding liquid to thin it down, for example, use distilled water with water based formulas and IPA (isopropyl alcohol) with alcohol based formulas.  

It's essential to clean your airbrush thoroughly inbetween uses and to try to avoid allowing product to dry out in the gun as this is one of the main reasons for blockages.

Temptu