Mouldlife

PLATSIL GEL 00

£46.95
  • 2 Part platinum silicone rubber system
  • Neutral, translucent colour for realistic results
  • Incredibly life like- replicates real skin 
  • Professional use only: for creating special effects makeup

Mouldlife's Platsil Gel 00 is a 2 part platinum cured silicone for use as mold rubber to create ultra realistic pieces and for life casting.

Similar to the Platsil Gel 10 & 25 in all but the shore hardness with a 00-30 shore making it an already softer result and requiring less deadener.

This kit offers a 6 minute working time, a 30 minute demold time and a 1:1 mix ratio.

It has a high tear strength and provides a realistic flesh effect with movement.

A very popular system used by top MUA's and on major films such as Harry Potter, Narnia, Apocolypto & Pans Labyrinth.

This product is for professional use only by trained SFX Make Up Artists.

Prior to use, ensure that both Parts A & B are at room temperature (ideally surface & air temperature should be above 60°F during application and for the entire curing period).

Carefully measure or weigh Part B and then Part A (in proper ratio) into a clean mixing container. Mix thoroughly, scraping sides and bottom of the container. The mix should be quickly placed over the model or in the mold.

If more working time is needed, PlatSil® 71/73 Part R Retarder can be used.

Mold Making:

Seal any porous models (e.g: wood, plaster, etc) with wax, petroleum jelly, lacquer or paint to prevent penetration of the rubber into the pores of the material.

Both the model and any other surfaces that come into contact with the Plastsil should be coated lightly with a Release Agent(Do not use silicone-based release agents on surfaces that contact liquid PlatSil rubbers since inhibition and/or adhesion may occur. In addition, modeling clays containing sulfur will inhibit curing.

Contamination with soaps, amines, sulfur, tin compounds, polyester resins and some silicone rubbers can also inhibit surface cure.

PlatSil rubber may bond to cured silicone rubber unless a parting agent is used. If in doubt, test cure on a similar surface to ensure proper cure and release.

Porous models should be vented from beneath to prevent trapped air from causing bubbles in the rubber.

For best results, the PlatSil Gel mold should be allowed to cure for the specified demold time before it is put into use. No release agent is necessary for casting most materials in properly-cured PlatSil Gels. For longer mold life when casting epoxy, polyurethane or polyester resins, a barrier coat or release agent is recommended.

Add Smiths Theatrical Deadener to help soften and help make it look & feel like real living tissue.

UK Delivery Information

EVRI 2-5 days from £3.50 - UK Mainland Small Parcels FREE Over £25*

Order by 2pm Mon-Fri for delivery in 2-5 working days 8am-8pm (not signed for)

UPS Standard 2 days from £13

Order by 2pm Mon-Fri for delivery in 1-2 working days.

EVRI Next Day from £4.95

Order by 3pm Mon-Fri for delivery by next working day between 8am-8pm

UPS Express Next Day From £20.00

Order by 3pm Mon - Fri for delivery next working day by 10.30am ** (signed for)

Same Day Delivery to London Postcodes & Film Studios From £10.00

Order by 4pm Mon - Fri for same day delivery)

Free Collect In Store.

Allow 2 Hours within Business Opening Times

Please note we only have 1 location to collect from at Unit 12, 284 Water Road, Wembley, HA0 1HX

* These timescales & prices are for UK Mainlaind and may take longer or differ in price for Highlands, Islands & remote areas.

** These services are only available for UK Mainland

Delivery Costs & Services are automatically calculated as you shop (because they are dependent on the products, weight, country & delivery service).

Worldwide Shipping:  Starts from £8.95 dependant on Country & Weight. Log In or Register an account and the shipping costs and services will automatically be worked out for your Country. Please note we cannot guarantee delivery dates outside the UK.

Standard shipping with EVRI does not provide tracking details if you require tracking for your order please choose UPS.

Please click here for further Delivery & Return Information & here for our shipping policy.

  • Mouldlife's Platsil Gel 00 is a 2 part platinum cured silicone for use as mold rubber to create ultra realistic pieces and for life casting.

    Similar to the Platsil Gel 10 & 25 in all but the shore hardness with a 00-30 shore making it an already softer result and requiring less deadener.

    This kit offers a 6 minute working time, a 30 minute demold time and a 1:1 mix ratio.

    It has a high tear strength and provides a realistic flesh effect with movement.

    A very popular system used by top MUA's and on major films such as Harry Potter, Narnia, Apocolypto & Pans Labyrinth.

    This product is for professional use only by trained SFX Make Up Artists.

    Continue Reading...
  • Prior to use, ensure that both Parts A & B are at room temperature (ideally surface & air temperature should be above 60°F during application and for the entire curing period).

    Carefully measure or weigh Part B and then Part A (in proper ratio) into a clean mixing container. Mix thoroughly, scraping sides and bottom of the container. The mix should be quickly placed over the model or in the mold.

    If more working time is needed, PlatSil® 71/73 Part R Retarder can be used.

    Mold Making:

    Seal any porous models (e.g: wood, plaster, etc) with wax, petroleum jelly, lacquer or paint to prevent penetration of the rubber into the pores of the material.

    Both the model and any other surfaces that come into contact with the Plastsil should be coated lightly with a Release Agent(Do not use silicone-based release agents on surfaces that contact liquid PlatSil rubbers since inhibition and/or adhesion may occur. In addition, modeling clays containing sulfur will inhibit curing.

    Contamination with soaps, amines, sulfur, tin compounds, polyester resins and some silicone rubbers can also inhibit surface cure.

    PlatSil rubber may bond to cured silicone rubber unless a parting agent is used. If in doubt, test cure on a similar surface to ensure proper cure and release.

    Porous models should be vented from beneath to prevent trapped air from causing bubbles in the rubber.

    For best results, the PlatSil Gel mold should be allowed to cure for the specified demold time before it is put into use. No release agent is necessary for casting most materials in properly-cured PlatSil Gels. For longer mold life when casting epoxy, polyurethane or polyester resins, a barrier coat or release agent is recommended.

  • Add Smiths Theatrical Deadener to help soften and help make it look & feel like real living tissue.
  • UK Delivery Information

    EVRI 2-5 days from £3.50 - UK Mainland Small Parcels FREE Over £25*

    Order by 2pm Mon-Fri for delivery in 2-5 working days 8am-8pm (not signed for)

    UPS Standard 2 days from £13

    Order by 2pm Mon-Fri for delivery in 1-2 working days.

    EVRI Next Day from £4.95

    Order by 3pm Mon-Fri for delivery by next working day between 8am-8pm

    UPS Express Next Day From £20.00

    Order by 3pm Mon - Fri for delivery next working day by 10.30am ** (signed for)

    Same Day Delivery to London Postcodes & Film Studios From £10.00

    Order by 4pm Mon - Fri for same day delivery)

    Free Collect In Store.

    Allow 2 Hours within Business Opening Times

    Please note we only have 1 location to collect from at Unit 12, 284 Water Road, Wembley, HA0 1HX

    * These timescales & prices are for UK Mainlaind and may take longer or differ in price for Highlands, Islands & remote areas.

    ** These services are only available for UK Mainland

    Delivery Costs & Services are automatically calculated as you shop (because they are dependent on the products, weight, country & delivery service).

    Worldwide Shipping:  Starts from £8.95 dependant on Country & Weight. Log In or Register an account and the shipping costs and services will automatically be worked out for your Country. Please note we cannot guarantee delivery dates outside the UK.

    Standard shipping with EVRI does not provide tracking details if you require tracking for your order please choose UPS.

    Please click here for further Delivery & Return Information & here for our shipping policy.